Chapter 8: Configuring Modem Security

2Select Add Interface, which is a link below the Security Interfaces table, to display the

Firewall Add Interface page.

In the Session Name to Interface Mapping table, the Session Name is the name you assigned to a session during configuration. The Interface is the protocol type selected for that session and corresponds to the Name: field at the top of the page. NAT is attached to this session which is an external (WAN) interface.

3In the Name box, select the session (interface from the Session Name to Interface Mapping table shown on page 78) as the external interface to which NAT is bound.

4In the Interface Type box, select external.

5Click Apply and you automatically return to the Security Interface Configuration page.

6To bind this session with NAT to internal interfaces (private LAN-side IP addresses), click the button Enable NAT to internal interfaces located in the NAT column in the Security Interfaces table. To disable the binding of this session with NAT to internal interfaces, click the button

Disable NAT to internal interfaces located in the NAT column in the Security Interfaces table.

MM701G and MM702G User Manual

79