Complete a Quick Installation

COMPLETE A QUICK INSTALLATION

The modem is shipped with factory defaults as a Remote modem and does not require any additional configuration when used as a remote. Only the Central-Office modem requires configuration changes.

In a quick installation, you change configuration only for the Central-Office mode modem. The Remote modem uses its factory default parameters. To set up the Central-Office modem, follow the instructions in the following sections. The modems use a default bridging WAN session (RFC1483-bridged) which has a predefined ATM connection using Virtual Path ID of 0 and Virtual Channel ID of 35.

Configure for Central-Office Mode

1Select DSL on the menu bar, then select Advance Configuration under [DSL Options].

2In the Operating Mode box, select Central-Officeto set up this modem for this mode.

3Click Apply.

64

MM701G and MM702G User Manual