Complete a G.shdsl Quick Configuration
COMPLETE A G.SHDSL QUICK CONFIGURATIONConfigure basic operating parameters for the modem. | DSL |
1 Select DSL on the menu bar, then select Quick Configuration under
[DSL Options].
2Configure the following parameters as directed by your service provider:
Operating Mode
When the modem is connected to a service provider through a DSLAM, the operating mode is Remote (default setting).
When two modems are used in a point-to-point application (LAN extension, for example), one modem at the customer or user site is set to Remote and the second modem in the CO or wiring closet is set to Central-Office. For instruction on setting up G.shdsl parameters and other related parameters for a point-to-point modem application, go to Chapter 7, “Implementing a Point-to-Point LAN Extension.”
Standard Annex
Select one of the following Annexes:
•Annex-Afor operating conditions typically found in the North American implementation of G.shdsl
•Annex-Bfor operating conditions typically found in the European implementation of G.shdsl. This is the default mode for the MM701G modem.
58 | MM701G and MM702G User Manual |
