Manage WAN Sessions

from the service provider via a DHCP server. If you enable DHCP client, leave the next two fields, WAN IP address and WAN Network Mask, blank. These fields will automatically receive values.

WAN IP Address

Type 10 then enter the IP address provided by the service provider for this session unless you have enabled WAN DHCP. The default IP address is 0.0.0.0.

WAN Network Mask

Type 11 then enter the network mask provided by the service provider for this session unless you have enabled WAN DHCP. The default WAN Network Mask is 0.0.0.0.

RIP Accept Mode

Type 12 then select one of the following:

1No RIP

2RIP Version 1

3RIP Version 2

4RIP Version 1 & 2 (default)

RIP Send Mode

Type 13 then select one of the following:

1No RIP

2RIP Version 1

3RIP Version 2 (default)

4RIP Version 1 & 2

2Enter 14 to Apply new setting to add the new RFC1483 routed session to your session list. Or, you can Enter 15 to Delete session.

112

MM701G and MM702G User Manual