Chapter 4: Configuring the WAN

Set Up an RFC 1483 Routed Session

You selected RFC 1483 routed from the WAN Configuration page to display the following page.

1Configure the following parameters for each session:

Session Name

Enter a unique, descriptive identifier for the session. This name can have a maximum of 32 characters.

Virtual Path ID (VPI)

Enter the value (from 0 to 4,095) provided by the service provider. The number identifies the virtual path that transports ATM cells between the modem and the service provider. This value must match the virtual path identification (VPI) value the service provider uses for this connection.

Virtual Channel ID (VCI)

Enter the value (from 32 to 65,535) provided by the service provider. The number identifies the virtual channel for this session that transports ATM cells between the modem and the service provider. This value must match the virtual channel identification (VCI) value the service provider uses for this connection.

MM701G and MM702G User Manual

29