Connect Cables

DSL line port

Wall jack with

DSL service

DSL

LINE

 

10Base-T port

-T

MDI MDI-XPOWER

PC, hub or other

network device

PowerM0152-B connector

Ensure that the NIC in the PC and the modem LAN port are both set to either half- or full-duplex for the transmission direction(s). If you need to change the modem LAN port setting to match the NIC, follow the procedures in “Manage DSL” on page 118 (half-duplex is the default).

2Connect the cables to the modem rear panel as shown above:

•silver cable to the DSL line port and wall jack

•black Ethernet cable to the 10Base-T port and to another Ethernet device such as a PC, hub, or router

•power cable to the modem power connector and to facility power

3Refer to “LED Status Indications” on page 5, to check modem LED status indications.

4

MM701G and MM702G User Manual