Connect to the Console Port

CONNECT TO THE CONSOLE PORT

1Install the flat gray console cable between the modem Console port and your PC as shown below, using the DB-9 port adapter on the PC, if required.

PC

9-pin COM port

Adapter

D

 

 

SL

LIN

 

 

E

C

 

O

S

 

O

 

LE

10BASE-T

MDI

POW

E

MDI-X

 

 

R

Grey cable

Console port

M0326-A

ACCESS THE COMMAND-LINE INTERFACE

You can access the command-line interface through the direct connection to the modem console port and using a terminal emulation program. You can also access the command-line interface using a telnet session. To use a telnet session, you must have IP access to the modem either through the 10Base-T LAN port (LAN-side access) or through an IP address assigned to a WAN session (WAN-side access). The following sections provide instructions for setting up both types of command-line interface access.

100

MM701G and MM702G User Manual