Complete a Custom Configuration

COMPLETE A CUSTOM CONFIGURATION

If you implement custom configuration where you do not use factory default parameters for your modems, you will need to make changes to the configuration on both the Remote and the Central-Office modem. The following sections provide configuration changes for the Remote modem and then for the Central-Office modem.

Configure the Remote Modem

To configure the remote modem, you need to change the following settings:

•operating mode for the modem, (see “Configure the Remote Operating Mode” on page 66)

•WAN parameters, (see “Configure the Remote WAN” on page 67)

•LAN parameters, (see “Configure the Remote LAN” on page 69)

Configure the Remote Operating Mode

1Select DSL on the menu bar then select Advance Configuration under [DSL Options].

2In the Operating Mode box, select Remote to configure the modem for this mode.

3Click Apply.

66

MM701G and MM702G User Manual