Appendix A: Accessing the Command-Line Interface

Configure G.shdsl Parameters

You can complete either a quick configuration or an advanced configuration for the G.shdsl line parameters. The following sections provide procedures for each configuration type.

Complete a Quick Configuration

1From the G.SHDSL Menu, enter 2 to display the G.SHDSL Quick Configuration menu.

2Configure the following parameters as directed by your service provider:

Operating Mode

Type 1 then select 1 for Remote and 2 for Central-Office.

When the modem is connected to a service provider through a DSLAM, the operating mode is Remote (default setting). When two modems are used in a point-to-point application (LAN extension, for example), one modem at the customer or user site is set to Remote, and the second modem in the CO or wiring closet is set to Central-Office. For instruction on setting up G.shdsl parameters and other related parameters for a point-to-point modem application, go to Chapter 7, “Implementing a Point-to-Point LAN Extension.”

MM701G and MM702G User Manual

119