Edit a WAN Session

The following shows the fields you can edit for a PPP session or you can delete the session. The Protocol field at the top of the dialog is read-only. It indicates the protocol that you previously selected for this session.

3Change session parameters as required. Go to the following pages for parameter definitions based on the protocol used for that session:

•For an RFC1483-Bridge session, go to page 27.

•For an RFC1483-Routed session, go to page 29.

•For a PPPoA Routed session, go to page 32.

•For a PPPoE Routed session, go to page 32.

4Do one of the following:

•Click Apply, then save changes as described in Chapter 5, “Saving Changes.”

•Click Delete to entirely remove the session, then save changes as described in Chapter 5, “Saving Changes.”

38

MM701G and MM702G User Manual