Configure the LAN

CONFIGURE THE LAN

From the LAN Configuration page, configure the parameters for the LAN as indicated by your system administrator. The default protocol for the LAN port is bridged.

1Select LAN on the menu bar, then select LAN Setup under [LAN Options] Configuration page.

LAN

LAN Setup

to access the LAN

2Configure the following parameters:

LAN Protocol

The LAN protocol is set to bridged and cannot be changed through the Web interface. If you want to change the protocol to routed, use the command-line interface (go to “Set Up the LAN” on page 104).

14

MM701G and MM702G User Manual