Configure a New WAN Session
ATM QoS
Select the ATM Quality of Service indicated by your service provider. The options are:
•UBR (unspecified bit rate is the default setting)
•CBR (constant bit rate)
•
•
QoS Peak Cell Rate
Enter the QoS Peak Cell Rate (PCR) value supplied by your service provider. If you are not provided a PCR value, use the default. PCR is the maximum rate at which data is transferred on the line and measured in ATM cells per second. The valid range is
QoS Sustainable Cell Rate
Enter the QoS Sustainable Cell Rate (SCR) value supplied by your service provider. Use for
QoS Maximum Burst Size
Enter the QoS Maximum Burst Size (MBS) value supplied by your service provider. Use with
Encapsulation
Select the encapsulation type as indicated by the service provider. The options are:
•
•
2Click Create to add the new
28 | MM701G and MM702G User Manual |