Chapter 1: Installing the Modem

STEP 4—CONNECT CABLES

Install cables for the Ethernet port (“Connect the 10Base-T Port” below). Then check LED status on page 5.

Connect the 10Base-T Port

Set the modem MDI/MDI-X switch for the 10Base-T port to allow the modem to connect directly to other network devices such as a PC, hub, switch, or router.

1Set the modem MDI/MDI-X switch to one of the following:

•MDI-X when connecting to a device such as a PC Ethernet NIC card that has an MDI port

•MDI when connecting to a device such as a hub, switch, or router that have MDI-X ports

MDI-X

MDI

M0325-A

For connection to devices such as a PC Ethernet NIC

For connection to devices such as a hub, switch, or router

MM701G and MM702G User Manual

3