Complete a DSL Advanced Configuration

COMPLETE A DSL ADVANCED CONFIGURATION

Configure the G.shdsl parameters for the modem to facilitate it synchronizing with either a DSLAM or another modem to which it attaches.

1Select DSL on the menu bar, then select Advance Configuration under

DSL

Advance Configuration

[DSL Options].

2Configure the following parameters as directed by your service provider:

Operating Mode

When the modem is connected to a service provider through a DSLAM, the operating mode is Remote (default setting).

When two modems are used in a point-to-point application (LAN extension, for example), one modem at the customer or user site is set to Remote and the second modem in the CO or wiring closet is set to Central-Office. For instruction on setting up G.shdsl parameters and other related parameters for a point-to-point modem application, go to Chapter 7, “Implementing a Point-to-Point LAN Extension.”

Standard Annex

Determines the transmission standards to which this G.shdsl connection will comply. The Annex standard should be the same at both ends of the connection. Select one of the following Annexes:

•Annex-Afor operating conditions typically found in the North American implementation of G.shdsl

60

MM701G and MM702G User Manual