ADTRAN ESU 120e user manual Step Action

Chapter 3. O peration

To set up the ESU 120e to work with T-Watch PRO over the LAN, follow these steps:

Step Action

1Set the Unit ID using the Front Panel. See Unit ID on page page 6-4 for details.

2Set TCP/IP interface to 10BaseT (or SLIP) using the Front Panel.

3Configure the IP address, default gateway, and subnet mask using the Front Panel.

4Follow the installation instructions for T-Watch PRO to start the program and connect to the unit.

To set up the ESU 120e to work with T-Watch PRO over a direct EIA-232 connection, the following steps are required:

Step	Action
1	Set the Unit ID and set a passcode using the Front Panel.
	See Unit ID on page 6-4 and Set Passcode on page 6-2
	for details.
2	Set the control port rate to the same setting as the PC
	Com port.
3	Connect the PC Com port to the Chain-In port on the
	ESU 120e using the DB25 adapter and modular cable
	provided.
4	Follow the installation instructions for T-Watch PRO to
	start the program and connect to the unit.

61200420L1-1 ESU 120e User Manual 3-9