ADTRAN ESU 120e user manual Review MAP, Review Temp, Edit Temp, Apply Temp a

Chapter 5. Configuration Menu

Menu Item	Description
	Scroll to select the port which is dependent on the
	installed option card. Press Enter to complete the
	selection and move the cursor back to the TS0
	field.With the cursor on the TS0 field, the TS0 number
	can be incremented or decremented by scrolling. If
	Copy is pressed, the contents of the last TS0 entered
	are placed in the new TS0 number.When all entries
	are complete, Cancel moves the cursor to the last of
	the submenu choices, 6)APPLY. Either apply the
	newly created TS0 map or press Cancel to return to
	the TS0 Map A (B) submenu choices.
	Selecting Apply will not disrupt the operation of
	unmodified ports
REVIEW MAP	Permits a quick review of the number of TS0s
A(B)	assigned to each port and the number of unassigned
	TS0s (Idle or TST) as defined in the currently applied
	Map A(B).
REVIEW TEMP	This menu item is operated the same for the TEMP
	map as is 3)REVIEW MAP A or Map B.
EDIT TEMP	The map in the TEMP file can be edited to whatever
	configuration is desired. If Map A had been copied
	into the TEMP file, then after editing, the TEMP file
	could be applied to MAP A or MAP B. The menu
	operation is identical to 2) CREATE TEMP with the
	exception that the existing port selections display.
APPLY TEMP > A	Writes the TEMP map into Map A. Apply is usually
	the last step in updating a map and is accessed
	automatically at the end of editing or creating a
	temporary map. Currently, it can be bypassed by
	selecting another menu choice.

5-16 ESU 120e User Manual 61200420L1-1