ADTRAN ESU 120e user manual Unit Menu, May not be used as a terminal interface

Chapter 5. Configuration Menu

Unit Menu

The Unit menu changes the baud rate of the Control In port and the setup of the Dial Out port. The menu items are:

Menu Item	Description
Ctl Port	Sets the baud rate for communication with the PC or
	modem.
	Choices: 1200, 2400, 9200, 9600, and 38400 kbps
Traps	Enables or disables the transmission of trap
	messages.
	Choices: Enable and Disable
Access	Sets the method of connection from the ESU 120e to
	T-Watch/SNMP.
	Choices:
	Direct - Used if connected directly to the PC.
	Dial - Used when connection is through a modem.
	The dial string is entered from T-Watch/SNMP.
Init Modem	Allows you to choose an industry standard or a
	custom initialization string for a modem connected
	to the control port.
	Choices: Industry standard and Custom
	Initialization String
Exit Term Mode	Takes the unit out of terminal mode.
IP Interface	Selects the TCP/IP physical interface; 10-Base-T
	Ethernet or SLIP using the EIA-232 serial port.
	Choices: 10-Base-T Ethernet or SLIP
	If this option is set to SLIP, the EIA-232 port
	may not be used as a terminal interface.
IP Address	This is the IP address that uniquely identifies the
	ESU 120e on a TCP/IP network. This address is
	composed of four decimal numbers, each in the
	range of 0 to 255, separated by periods. This value is
	used for either the 10BaseT Ethernet or SLIP
	interface, depending on the IP interface setting

61200420L1-1 ESU 120e User Manual 5-11