Installing the 82357A
Step 1: Before You Install the 82357A
Check System Requirements
Before you install the Agilent IO Libraries Suite, you should verify that your system meets the minimum hardware and software requirements listed to install and use the software. Adding additional RAM may improve overall system performance.
NOTE
The 82357A USB/GPIB Interface Converter is supported ONLY on Windows 98 Second Edition, Windows Me, Windows 2000, and Windows XP Professional.
Item |
| Minimum Requirements |
|
|
|
Hardware Requirements |
| |
|
|
|
PC Operation/ |
| 200 MHz Pentium II (800 MHz recommended) |
Memory |
| and 64 MBytes RAM (96 MB recommended). |
|
|
|
Hard Drive Space |
| 215 MB for installation: 160 MB for Microsoft |
|
| .NET Framework, 55 MB for Agilent IO Libraries |
|
| Suite |
|
| 125 MB for operation: 70 MB for Microsoft .NET |
|
| Framework, 55 MB for Agilent IO Libraries Suite |
|
|
|
USB Port |
| At least one USB port (to connect 82357A) |
|
|
|
Software Requirements |
| |
|
|
|
Operating System |
| Windows 98 SE, Windows Me, Windows 2000 |
|
| (Service Pack 4 or later), or Windows XP |
|
| Professional (Service Pack 1 or later). |
|
|
|
Agilent IO Libraries |
| Agilent IO Libraries Version L.01.00 or greater, or |
|
| Agilent IO Libraries Suite Version 14.0 or greater. |
|
|
|
NOTE
For Windows 98 Second Edition, you may need to install usbscan.sys, located on the Windows 98
Chapter 1 | 9 |
