Operation Complete, Recall | Agilent Technologies Model A.08.xx

Language Reference

IEEE Common Commands

The number 4 (P in the preceding query response format) means there are 4 numbers that make up the size of the data that follows. In this example, 2031 bytes will follow the number 4 (42031).

2031 and 2016 (QQQ and MMM in the preceding query response format) represent data size in bytes.

The state can be changed by sending this block of data to the instrument after removing the size information:

Example: SYST:SET #NMMM<state_data>

Operation Complete

*OPC

*OPC?

Sets bit 0 in the standard event status register to “1” when all pending operations have finished.

The query stops any new commands from being processed until the current processing is complete. Then it returns a “1”, and the program continues. This query can be used to synchronize events of other instruments on the external bus.

*OPC and *OPC? are currently effective only when immediately preceded by either

the :INITiate:IMMediate or a :CALibration command.

Query Instrument Options

This function is provided in the analyzer SCPI language reference in the SYSTem subsystem under :SYSTem:OPTions?.

Recall

*RCL <register>

This command recalls the instrument state from the specified instrument memory register.

Range:	Registers are an integer, 0 to 127
Remarks:	See also commands :MMEMory:LOAD:STATe and
	:MMEMory:STORe:STATe
	If the state being loaded has a newer firmware revision than the
	revision of the instrument, no state is recalled and an error is
	reported.
	If the state being loaded has an equal firmware revision than the
	revision of the instrument, the state will be loaded.
	If the state being loaded has an older firmware revision than the
	revision of the instrument, the instrument will only load the
	parts of the state that apply to the older revision.

Chapter 5

195

Model A.08.xx specifications

Agilent Technologies has long been a leader in the field of measurement and analytical instrumentation, and their Model A.08.xx is a prime example of this expertise. This advanced instrument is designed for a wide array of applications, spanning from life sciences to chemical analysis, offering unparalleled precision and reliability to meet the demands of laboratory environments.

One of the main features of the A.08.xx model is its advanced measurement capabilities. The instrument boasts a high-resolution detector that provides exceptional sensitivity, allowing researchers to detect even trace levels of analytes in complex samples. The enhanced signal-to-noise ratio is particularly beneficial for users working with low concentrations, ensuring accurate results without the need for laborious sample preparation.

The A.08.xx is equipped with state-of-the-art technologies that significantly enhance its performance. One such technology is its multi-wavelength detection system, which allows simultaneous analysis of multiple compounds within a single run. This not only boosts efficiency but also reduces the time required for method development and validation. Additionally, the model utilizes sophisticated software for data analysis, providing users with intuitive tools to interpret results quickly and effectively.

Another characteristic of the A.08.xx is its robust build quality and user-friendly interface. Designed for rigorous laboratory use, the instrument can withstand the demanding conditions of a busy research environment. Its intuitive touchscreen display simplifies operations, allowing users to set up experiments and navigate through various functions with ease. This user-centric design reduces the learning curve for new operators, enhancing productivity in the lab.

The A.08.xx also incorporates connectivity features that align with modern laboratory needs. With options for remote monitoring and data sharing, researchers can easily collaborate and access results in real-time, streamlining workflows and promoting innovation.

In conclusion, Agilent Technologies’ Model A.08.xx is not just an analytical instrument; it is a comprehensive solution for researchers and scientists seeking reliability and performance in their analytical work. With its advanced measurement capabilities, cutting-edge technologies, and user-friendly design, it continues to set the standard for excellence in laboratory instrumentation, facilitating groundbreaking research across various scientific fields.

Agilent Technologies Model A.08.xx manual Operation Complete, Query Instrument Options, Recall

Models: Model A.08.xx