Agilent Technologies Model A.08.xx manual Clear Marks, CALCulateEMISLIStCLEar ALLCURRentinteger

Language Reference

CALCulate:EMI:SLISt Subsection

Uncertainty	ADD – The uncertainty for a signal may be entered for a signal.
	If not provided the default value for the instrument is applied to
	the signal. The uncertainty may be entered in Hz or engineering
	notation.
	FETCH – The uncertainly is returned in Hz.
Total Correction	ADD – The total correction factor may be entered in integer or
	engineering format. The units are mdB.
	FETCH – The total correction factor is returned in mdB.
Mark	ADD – The signal may be marked during the ADD process by
	setting this flag to 1 or On. It may also be explicitly turned Off
	or 0.
	FETCH – The signal mark is returned as a 1 (On) or 0 (Off).

Peak, Quasi-Peak, and Average Detector Amplitude Flags

ADD – The presence of an amplitude number in the add string automatically turns on the amplitude flag for that detector. That value may be overridden by explicitly setting the detector to 0 or Off.

	FETCH – The detector flag is returned as a 1 (On) or 0 (Off).
Comment	ADD – The comment is a single line of text with a maximum
	length of 31 characters. Characters in excess of 31 are truncated.
	FETCH – The comment is returned in the 11th position and
	delimited by commas.
Factory Preset
and *RST:	Not affected by preset

Clear Marks

:CALCulate:EMI:SLISt:CLEar ALLCURRent<integer>

Clears marks on all, current, or specific signals

Factory Preset
and *RST:	Not affected by preset
Remarks:	This command takes an <integer> value which corresponds to
	the position of a signal in the signal list. Valid range is 1 to 2000.
Front Panel
Access:	MEASURE, More, Signal Marking, Clear

204 Chapter 5