Agilent Technologies Model A.08.xx manual Entering Amplitude Correction Data

Programming Examples

Entering Amplitude Correction Data

Entering Amplitude Correction Data

/************************************************************/

/* Entering Amplitude Correction Data		*/
/*		*/
/* This example is for the E44xxB ESA Spectrum Analyzers		*/
/* and E740xA EMC Analyzers.		*/
/*		*/
/* This C programming example does the following.		*/
/* The SCPI instrument commands used are given as		*/
/* reference.		*/
/*		*/
/* - Opens a GPIB session at address 18		*/
/* - Clears the Analyzer		*/
/* - Resets the Analyzer		*/
/*	*RST	*/
/* - Sets the stop frequency to 1.5 GHz		*/
/*	SENS:FREQ:STOP 1.5 GHZ	*/
/* - Set the input port to the 50 MHz amplitude reference		*/
/*	CAL:SOUR:STAT ON	*/

/* - Enter amplitude correction frequency/amplitude pairs: */

/*	0 Hz/ 0 dB, 100 MHz/5 dB, 1 GHz/-5 dB, 1.5 GHz/ 10 dB	*/
/*	SENS:CORR:CSET1:DATA 0,0,100E6,5.0,1.0E9,-5.0,...	*/
/* - Activate amplitude correction		*/
/*	SENS:CORR:CSET1:DATA	*/
/*	SENS:CORR:CSET1:ALL:STAT ON	*/

/* - Query the analyzer for the amplitude corection factors */

/*	SENS:CORR:CSET1:DATA?	*/
/* - Store them in an array		*/
/* - Display the array		*/
/* - Close the session		*/

/************************************************************/

#include <stdio.h> #include <stdlib.h> #include <math.h> #include <conio.h> #include <ctype.h> #include <string.h> #include "visa.h"

#define hpESA_IDN_E4401B "Hewlett-Packard, E4401B" #define hpESA_IDN_E4411B "Hewlett-Packard, E4411B" #define hpEMC_IDN_E7401A "Hewlett-Packard, E7401A"

Chapter 3 145