DataLF-EOI | Agilent Technologies Model A.08.xx guide

View/Trace, Operations, 1 <–> 3

:TRAC:EXCH TRACE3,TRACE2

View/Trace, Operations, 2 <–> 3

Trace Math Add

:TRACe:MATH:ADD

<destination_trace>,<source_trace1>,<source_trace2>

Adds the magnitudes of the two source traces and places the result in the destination trace.

Destination traces are: TRACE123

Source traces are: TRACE123

Exchanges 2 traces, point by point and leaves both in VIEW mode. Trace_1 choices are: TRACE123

Trace_2 choices are: TRACE123 Example:

Front Panel Access:

Exchange Traces

:TRACe:EXCHange <trace_1>,<trace_2>

		Language Reference
		TRACe Subsystem
	This command does not allow setting all trace points to the same amplitude value
NOTE
	by sending just a single value. If you need to set all trace points to the same value,
	you must send the same value to each trace point.
	Rawtrace data is available with UINT,16 or INT,32 formatting. It is unitless,
	returns uncorrected ADC values, and is the fastest method of obtaining
	measurement data.
	Example:	:TRAC:DATA TRACE1,#41604<binary trace
	Example:	:TRAC:DATA TRACE1,#41604<binary trace
		data><LF–EOI>
	Remarks:	Commands :MMEM:STOR:TRAC and :MMEM:LOAD:TRAC are
		used to transfer trace data to, or from, the internal hard drive or
		floppy drive of the instrument.

The number of points in a trace is specified by [:SENSe]:SWEep:POINts. The trace data format is determined by :FORMat[:TRACe][:DATA], and the binary data byte order is determined by :FORMat:BORDer.

If the parameter to the query is LLINE1 or LLINE2, a very large positive or negative value is returned at any point outside the range of limit values. A large positive number is returned for an upper limit, and a large negative value for lower limits. There is no SCPI short form for parameters LLINE1LLINE2.

Chapter 5

329

Model A.08.xx specifications

Agilent Technologies has long been a leader in the field of measurement and analytical instrumentation, and their Model A.08.xx is a prime example of this expertise. This advanced instrument is designed for a wide array of applications, spanning from life sciences to chemical analysis, offering unparalleled precision and reliability to meet the demands of laboratory environments.

One of the main features of the A.08.xx model is its advanced measurement capabilities. The instrument boasts a high-resolution detector that provides exceptional sensitivity, allowing researchers to detect even trace levels of analytes in complex samples. The enhanced signal-to-noise ratio is particularly beneficial for users working with low concentrations, ensuring accurate results without the need for laborious sample preparation.

The A.08.xx is equipped with state-of-the-art technologies that significantly enhance its performance. One such technology is its multi-wavelength detection system, which allows simultaneous analysis of multiple compounds within a single run. This not only boosts efficiency but also reduces the time required for method development and validation. Additionally, the model utilizes sophisticated software for data analysis, providing users with intuitive tools to interpret results quickly and effectively.

Another characteristic of the A.08.xx is its robust build quality and user-friendly interface. Designed for rigorous laboratory use, the instrument can withstand the demanding conditions of a busy research environment. Its intuitive touchscreen display simplifies operations, allowing users to set up experiments and navigate through various functions with ease. This user-centric design reduces the learning curve for new operators, enhancing productivity in the lab.

The A.08.xx also incorporates connectivity features that align with modern laboratory needs. With options for remote monitoring and data sharing, researchers can easily collaborate and access results in real-time, streamlining workflows and promoting innovation.

In conclusion, Agilent Technologies’ Model A.08.xx is not just an analytical instrument; it is a comprehensive solution for researchers and scientists seeking reliability and performance in their analytical work. With its advanced measurement capabilities, cutting-edge technologies, and user-friendly design, it continues to set the standard for excellence in laboratory instrumentation, facilitating groundbreaking research across various scientific fields.

Agilent Technologies Model A.08.xx manual Tracdata TRACE1,#41604binary trace, DataLF-EOI

Models: Model A.08.xx

:TRAC:DATA TRACE1,#41604<binary trace

data><LF–EOI>

Commands :MMEM:STOR:TRAC and :MMEM:LOAD:TRAC are

Model A.08.xx specifications