Language Reference

SYSTem Subsystem

Locate SCPI Command Errors

:SYSTem:ERRor:VERBose OFFON01

:SYSTem:ERRor:VERBose?

Adds additional information to the error messages returned by the :SYSTem:ERRor? command. It indicates which SCPI command was executing when the error occurred and what about that command was unacceptable.

<error number>,”<error message>;<annotated SCPI command>”

The maximum length of the <annotated SCPI command> is 80 characters. If the error occurs in a SCPI command longer than 80 characters, the <Err> sentinel is placed at the end of the <annotated SCPI command>.

Example:

First set SYST:ERR:VERBose ON

If the command SENSe:FREQuently:CENTer 942.6MHz is sent, then sending SYST:ERR? returns:

−113,”Undefined header;SENSe:FREQuently:<Err>CENTer 942.6MHz $<NL>”

The <Err> shown after FREQuently shows you the spelling error. (The $<NL> is the typical representation for the command terminator.

If the command SENSe:FREQ:CENTer 942.6Sec is sent, then sending SYST:ERR? returns:

−131,”Invalid suffix;SENSe:FREQuency:CENTer 942.6Sec<Err> $<NL>”

 

The <Err> shown after Sec shows you the invalid suffix.

Factory Preset

 

and *RST:

Not affected by *RST

Remarks:

The verbose SCPI error debugging state is global to all the SCPI

 

interfaces.

History:

Added with firmware revision A.08.00.

Front Panel

 

Access:

System, Show Errors, Verbose SCPI ON OFF

Host Identification Query

:SYSTem:HID?

This command returns a string that contains the host identification. This ID is required in order to obtain the license key that enables a new application or option.

Front Panel

Access:System, Show System

Chapter 5

323

Page 322 Page 324
Page 323
Image 323
Agilent Technologies Model A.08.xx Locate Scpi Command Errors, Host Identification Query, First set SYSTERRVERBose on
Page 322 Page 324

Model A.08.xx specifications

Agilent Technologies has long been a leader in the field of measurement and analytical instrumentation, and their Model A.08.xx is a prime example of this expertise. This advanced instrument is designed for a wide array of applications, spanning from life sciences to chemical analysis, offering unparalleled precision and reliability to meet the demands of laboratory environments.

One of the main features of the A.08.xx model is its advanced measurement capabilities. The instrument boasts a high-resolution detector that provides exceptional sensitivity, allowing researchers to detect even trace levels of analytes in complex samples. The enhanced signal-to-noise ratio is particularly beneficial for users working with low concentrations, ensuring accurate results without the need for laborious sample preparation.

The A.08.xx is equipped with state-of-the-art technologies that significantly enhance its performance. One such technology is its multi-wavelength detection system, which allows simultaneous analysis of multiple compounds within a single run. This not only boosts efficiency but also reduces the time required for method development and validation. Additionally, the model utilizes sophisticated software for data analysis, providing users with intuitive tools to interpret results quickly and effectively.

Another characteristic of the A.08.xx is its robust build quality and user-friendly interface. Designed for rigorous laboratory use, the instrument can withstand the demanding conditions of a busy research environment. Its intuitive touchscreen display simplifies operations, allowing users to set up experiments and navigate through various functions with ease. This user-centric design reduces the learning curve for new operators, enhancing productivity in the lab.

The A.08.xx also incorporates connectivity features that align with modern laboratory needs. With options for remote monitoring and data sharing, researchers can easily collaborate and access results in real-time, streamlining workflows and promoting innovation.

In conclusion, Agilent Technologies’ Model A.08.xx is not just an analytical instrument; it is a comprehensive solution for researchers and scientists seeking reliability and performance in their analytical work. With its advanced measurement capabilities, cutting-edge technologies, and user-friendly design, it continues to set the standard for excellence in laboratory instrumentation, facilitating groundbreaking research across various scientific fields.
Top Page Image Contents