Allied Telesis AT-2972SX manual Managing the Bacs Application, Initializing, Application Updating

Advanced Control Suite User’s Guide

Managing the BACS Application

Initializing the

BACS 2

Application

Updating the

BACS

Application

Removing the

BACS

Application

This section contains the following procedures for managing the BACS application:

ˆ“Initializing the BACS 2 Application,” next

ˆ“Updating the BACS Application” on page 25

ˆ“Removing the BACS Application” on page 25

To initialize the BACS 2 application on your computer, perform the following procedure.

1.In the Control Panel, double-click Broadcom Control Suite 2.

Or, click Start, point to Programs, point to Broadcom, and then click Broadcom Advanced Control Suite 2.

Note

You must install the Allied Telesyn adapters before you initialize the BACS application.

To update the BACS application on your computer, perform the following procedure.

Note

Before you begin the update, close all applications, windows, and dialog boxes.

1.Double-click Setup.exe.

2.Click Next in Broadcom Management Programs Setup.

3.Read the license agreement and click Yes.

4.In Select Components, click the component you want to install:

ˆControl Suite. Installs the Broadcom Advanced Server Control Suite.

ˆBASP. Installs the Broadcom Advanced Server Program.

5.Follow the on-screen instructions.

To remove the BACS application from your computer, perform the following procedure.

1. In the Control Panel, double-click Add/Remove Programs.

25