Installing the RPM Package

SNMP Files

Advanced Control Suite User’s Guide

7.The snmpget and snmpgetnext commands can be used to receive the BASP snmp objects such as:

%snmpget localhost public BASP-Config-MIB::btTeamNumber

%snmpgetnext localhost public BASP-Config- MIB::btTeamNumber

BASP SNMP objects are provided in the following text files:

BASP-Config-MIB.txt

BASP-Statistics-MIB.txt

Brcm-BSAPTrap-MIB.txt

Complete the following steps to install BASP SNMP agent from the RPM package.

1. To install the RPM package, run:

% rpm -i baspsnmp-{version}.i386.rpm

The BASP script and MIB files are installed. The snmpd.conf configuration file is modified to add support for the BASP SNMP agent.

2. Follow steps 4 - 6 in the “Installing the TAR Archive” on page 82.

Note

The current RPM installation fails to append the additional directives needed to the snmpd.conf file to support Basp objects. Therefore, follow the instruction (3) in the Install - TAR archive to modify the snmpd.conf file.

See Table 6 for a list of supported SNMP files.

 

Table 6. SNMP Files

 

 

 

Filename

 

Description

 

 

 

 

 

 

genBaspTrap

 

script monitoring the BASP trap events

 

 

 

getBaspInfo

 

script to process SNMP get/getnext

 

 

inquiries

 

 

 

BASP-Config-MIB.txt

 

SNMP MIB file for BASP configuration

 

 

objects

 

 

 

BASP-Statistics-

 

SNMP MIB file for BASP statistics

MIB.txt

 

objects

 

 

 

Brcm-BSAPTrap-

 

SNMP MIB file for BASP trap objects

MIB.txt

 

 

 

 

 

83

Page 83
Image 83
Allied Telesis AT2972SX/2, AT-2916SX, AT-2972SX manual Snmp Files, Filename Description