96 Operation
Chapter 4 - System Configuration
other radio settings as required before enabling the VAP interface (with the no
shutdown command). To view the current 802.11g radio settings for the VAP
interface, use the show interface wireless g [0~3] command as shown on
page 215.

4.6.1.2.3 CLI Commands for the Radio Settings

From the global configuration mode, enter the interface wireless g command to
access the 802.11g radio interface. From the 802.11g interface mode, you can
access radio settings that apply to all VAP interfaces. Use the turbo command to
enable this feature before setting the radio channel with the channel command.
Set any other radio setting as required before enabling the VAP interface (with the
no shutdown command). To view the current 802.11g radio settings for the VAP
interface, use the show interface wireless g [0~3] command as shown on
page 215.
4.6.1.3 Configuring WiFi Multimedia
Wireless networks offer an equal opportunity for all devices to transmit data from
any type of application. Although this is acceptable for most applications,
multimedia applications (with audio and video) are particularly sensitive to the
Enterprise AP(config)#interface wireless g 215
Enter Wireless configuration commands, one per line.
Enterprise AP(if-wireless g)#radio-mode g 219
Enterprise AP(if-wireless g)#channel auto 218
Enterprise AP(if-wireless g)#transmit-power full 218
Enterprise AP(if-wireless g)#super-g 224
Enterprise AP(if-wireless g)#preamble short 219
Enterprise AP(if-wireless g)#
Enterprise AP(config)#interface wireless g 215
Enter Wireless configuration commands, one per line.
Enterprise AP(if-wireless g)#channel 42 218
Enterprise AP(if-wireless g)#transmit-power full 218
Enterprise AP(if-wireless g)#speed 9 216
Enterprise AP(if-wireless g)#antenna id 0000 220
Enterprise AP(if-wireless g)#antenna control right 220
Enterprise AP(if-wireless g)#antenna location indoor 221
Enterprise AP(if-wireless g)#mic_mode hardware 240
Enterprise AP(if-wireless g)#super-g 224
Enterprise AP(if-wireless g)#beacon-interval 150 221
Enterprise AP(if-wireless g)#beacon-interval 150
Enterprise AP(if-wireless g)#dtim-period 5 222
Enterprise AP(if-wireless g)#multicast-data-rate 6 216
Enterprise AP(if-wireless g)#fragmentation-length 512 222
Enterprise AP(if-wireless g)#rts-threshold 256 223
Enterprise AP(if-wireless g)#