System Management Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 147
Default Setting
admin
Command Mode
Global Configuration
Example
5.5.5 password

After initially logging onto the system, you should set the password. Remember to

record it in a safe place. Use the no form to reset the default password.

Syntax
password <password>
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
smcadmin
Command Mode
Global Configuration
Example
5.5.6 ip ssh-server enable

This command enables the Secure Shell server. Use the no form to disable the

server.

Syntax
ip ssh-server enable
no ip ssh-server
Default Setting
Interface enabled
Command Mode
Interface Configuration (Ethernet)
Command Usage

The AP supports Secure Shell version 2.0 only.

Enterprise AP(config)#username bob
Enterprise AP(config)#
Enterprise AP(config)#password
Enterprise AP(config)#