28 Installation
Chapter 2 - Hardware Installation
2.3.5 Mounting the Wi² Unit
1With the bottom panel of the unit facing downwards, thread the two 9/16"
wide metal bands supplied through the brackets on the sides of the unit.
2Rotate the mounting bracket, so that the Wi² faces the Base Station.
3 Secure the Wi² unit to a pole as shown in Figure 2-12.

2.3.5.1 Mounting the Wi² Using the Tilt Accessory

The Wi² can also be installed on a wall or on a non-vertical pole using an optional
tilt accessory kit. The tilt accessory kit (Figure 2-13) includes:
A mounting bracket
3 metal bands for attaching the bracket to a pole
Screws for attaching the bracket to a wall
To pole mount the Wi² unit:
NOTE
The mounting bracket can be rotated up to 45o in any direction.
Figure 2-12: Pole Mounting the Wi²