Filtering Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 203
5.14.1 filter local-bridge

This command disables communication between wireless clients. Use the no form

to disable this filtering.

Syntax
filter local-bridge <all-VAP | intra-VAP>
no filter local-bridge
all-VAP - When enabled, clients cannot establish wireless communications with any other client,
either those associated to the same VAP interface or any other VAP interface.
intra-VAP - When enabled, clients associated with a specific VAP interface cannot establish
wireless communications with each other. Clients can communicate with clients associated to
other VAP interfaces.
Default
Disabled
Command Mode
Global Configuration
Command Usage
This command can disable wireless-to-wireless communications between clients via the AP.
However, it does not affect communications between wireless clients and the wired network.
Example
5.14.2 filter ap-manage

This command prevents wireless clients from accessing the management interface

on the AP. Use the no form to disable this filtering.

Syntax
filter ap-manage
no filter ap-manage
Default
Enabled
Command Mode
Global Configuration
Example
5.14.3 filter uplink enable

This command enables filtering of MAC addresses from the Ethernet port.

Enterprise AP(config)#filter local-bridge
Enterprise AP(config)#
Enterprise AP(config)#filter AP-manage
Enterprise AP(config)#