Installation
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 29
A 50 cm pole (diameter 6.03 cm)
Screws for attaching the pole to mounting bracket
1Place the bracket on the wall and use as a template to mark the position of the
holes to be drilled for the screws .
2Remove the bracket from the wall and drill a hole in each of the locations
marked.
3Insert anchors into the holes.
4Hold the bracket over the holes and insert a screw into each of the holes in the
bracket, and screw into the anchors in the wall. Secure the bracket to the wall,
making sure that the screw heads are as level with the bracket as possible.
Thread the metal bands provides with the tilt accessory through the slits in
the bracket and attach to the pole as shown in Figure 2-14.
Figure 2-13: Tilt Accessory Kit
To mount the tilt accessory on a wall:
To mount the tilt accessory on a non-vertical pole: