Advanced Configuration
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 47
4.4 Advanced Configuration
The Advanced Configuration pages include the following options.
Table 4-1: Menu
Menu Description Page
System Configures basic administrative and client access 48
Identification Specifies the host name 48
TCP / IP Settings Configures the IP address, subnet mask, gateway, and domain name servers 49
RADIUS Configures the RADIUS server for wireless client authentication and accounting 52
SSH Settings Configures Secure Shell management access 55
Authentication Configures 802.1X client authentication, with an option for MAC address
authentication
57
Filter Control Filters communications between wireless clients, access to the management
interface from wireless clients, and traffic matching specific Ethernet protocol
types
61
VLAN Enables VLAN support and sets the management VLAN ID 64
WDS Settings Not applicable for current release 66
AP Management Configures access to management interfaces 66
Administration Configures user name and password for management
access; upgrades software
from local file, FTP or TFTP server;
resets configuration settings to factory
defaults; and resets the AP
68
System Log Controls logging of error messages; sets the system clock via SNTP server or
manual configuration
74
RSSI Not applicable for current release 78
SNMP Configures SNMP settings 79
Radio Interface G Configures the IEEE 802.11g interface 85
Radio Settings Configures common radio signal parameters and other settings for each VAP
interface
85
Security Enables each VAP interface, sets the SSID, and configures wireless security 102
Status Displays information about the access point and wireless clients 120
AP Status Displays configuration settings for the basic system and the wireless interface 120
Station Status Shows the wireless clients currently associated with the access point 122
Event Logs Shows log me ssages sto red in memory 124