RADIUS Client
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 189
5.11 RADIUS Client
Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access for
RADIUS-aware devices to the network. An authentication server contains a
database of credentials, such as users names and passwords, for each wireless
client that requires access to the AP.

5.11.1 radius-server address

This command specifies the primary and secondary RADIUS servers.
Syntax
radius-server [secondary] address <host_ip_address | host_name>
•secondary - Secondary server.
•host_ip_address - IP address of server.
•host_name - Host name of server. (Range: 1-20 characters)
Table 5-12: RADIUS Client
Command Function Mode Page
radius-server address Specifies the RADIUS server GC 189
radius-server port Sets the RADIUS server network port GC 190
radius-server key Sets the RADIUS encryption key GC 190
radius-server retransmit Sets the number of retries GC 190
radius-server timeout Sets the interval between sending authentication
requests
GC 191
radius-server port-accounting Sets the RADIUS Accounting server network port GC 191
radius-server timeout-interim Sets the interval between transmitting accounting
updates to the RADIUS server
GC 192
radius-server
radius-mac-format
Sets the format for specifying MAC addresses on the
RADIUS server
GC 192
radius-server vlan-format Sets the format for specifying VLAN IDs on the RADIUS
server
GC 193
show radius Shows the current RADIUS settings Exec 193