802.1X Authentication
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 197
Default
None
Command Mode
Global Configuration
Command Usage
The AP currently only supports EAP-MD5 CHAP for 802.1X supplicant authentication.
Example
5.12.4 show authentication

This command shows all 802.1X authentication settings, as well as the address

filter table.

Command Mode
Exec
Example
Enterprise AP(config)#802.1x-supplicant user WA6102 dot1xpass
Enterprise AP(config)#
Enterprise AP#show authentication
Authentication Information
===========================================================
MAC Authentication Server : DISABLED
MAC Auth Session Timeout Value : 0 min
802.1x supplicant : DISABLED
802.1x supplicant user : EMPTY
802.1x supplicant password : EMPTY
Address Filtering : ALLOWED
System Default : ALLOW addresses not found in filter table.
Filter Table
MAC Address Status
----------------- ----------
00-70-50-cc-99-1a DENIED
00-70-50-cc-99-1b ALLOWED
=========================================================
Enterprise AP(config)#