202 Operation
Chapter 5 - Command Line Interface
5.14 Filtering Commands
The commands described in this section are used to filter communications
between wireless clients, control access to the management interface from
wireless clients, and filter traffic using specific Ethernet protocol types.
Table 5-15: Filtering Commands
Command Function Mode Page
filter local-bridge Disables communication between wireless clients GC 203
filter ap-manage Prevents wireless clients from accessing the management
interface
GC 203
filter uplink enable Ethernet port MAC address filtering GC 203
filter uplink Adds or deletes a MAC address from the filtering table GC 204
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
Ethernet packets against the protocol filtering table
GC 204
filter ethernet-type protocol Sets a filter for a specific Ethernet type GC 205
show filters Shows the filter configuration Exec 206