Wireless Interface Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 221
• In the current release, select id=0x0108 for the 8dBi omni antenna.
Example
5.18.11 antenna location

This command selects the antenna mounting location for the radio interface.

Syntax
antenna location <indoor | outdoor>
•indoor - The antenna is mounted indoors.
•outdoor - The antenna is mounted outdoors.
Default Setting
Indoor
Command Mode
Interface Configuration (Wireless)
Command Usage
• Selecting the correct location ensures that the AP only uses radio channels that are permitted in
the country of operation.
Example
5.18.12 beacon-interval

This command configures the rate at which beacon signals are transmitted from

the AP.

Syntax
beacon-interval <interval>
interval - The rate for transmitting beacon signals. (Range:20-1000 milliseconds)
Enterprise AP(if-wireless g)#antenna id 0000
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g)#antenna location indoor
Enterprise AP(if-wireless g)#