226 Operation
Chapter 5 - Command Line Interface
Default Setting
64
Command Mode
Interface Configuration (Wireless-VAP)
Example
5.18.21 assoc-timeout-interval

This command configures the idle time interval (when no frames are sent) after

which the client is disassociated from the VAP interface.

Syntax
assoc-timeout-interval <minutes>
minutes - The number of minutes of inactivity before disassociation. (Range:5-60)
Default Setting
30
Command Mode
Interface Configuration (Wireless-VAP)
Example
5.18.22 auth-timeout-value

This command configures the time interval within which clients must complete

authentication to the VAP interface.

Syntax
auth-timeout-value <minutes>
minutes - The number of minutes before re-authentication. (Range:5-60)
Default Setting
60
Command Mode
Interface Configuration (Wireless-VAP)
Example
5.18.23 shutdown

This command disables the wireless interface. Use the no form to restart the

interface.

Enterprise AP(if-wireless g: VAP[0])#max-association 32
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g: VAP[0])#association-timeout-interval 20
Enterprise AP(if-wireless g: VAP[0])#
Enterprise AP(if-wireless g: VAP[0])#auth-timeout-value 40
Enterprise AP(if-wireless g: VAP[0])#