System Management Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 143
5.5 System Management Commands
These commands are used to configure the user name, password, system logs,
browser management options, clock settings, and a variety of other system
information.
Table 5-5: System Management Commands
Command Function Mode Page
Country Setting
country Sets the AP country code Exec 144
Device Designation
prompt Customizes the command line prompt GC 145
system name Specifies the host name for the AP GC 146
snmp-server contact Sets the system contact string GC 173
snmp-server location Sets the system location string GC 173
Management Access
username Configures the user name for management access GC 146
password Specifies the password for management access GC 147
ip ssh-server enable Enables the Secure Shell server IC-E 147
ip ssh-server port Sets the Secure Shell port IC-E 148
ip telnet-server enable Enables the Telnet server IC-E 148
APmgmtIP Specifies an IP address or range of addresses allowed access to
the management interface
GC 151
APmgmtUI Enables or disables SNMP, Telnet or web management access GC 152
show APmanagement Shows the AP management configuration Exec 152
Web Server
ip http port Specifies the port to be used by the web browser interface GC 148
ip http server Allows the AP to be monitored or configured from a browser GC 149
ip http session-timeout Sets the timeout for the web browser interface GC 149
ip https port Specifies the UDP port number used for a secure HTTP
connection to the AP’s Web interface
GC 150
ip https server Enables the secure HTTP server on the AP GC 150
System Status
show system Displays system information Exec 153