Status Information
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 121
AP System Configuration – The AP System Configuration table displays the basic
system configuration settings:
System Up Time: Length of time the management agent has been up.
Ethernet MAC: The physical layer address for the Ethernet port.
Radio G MAC: The physical layer address for the 802.11b/g interface. System
Name: Name assigned to this system.
System Contact: Administrator responsible for the system.
IP Address: IP address of the management interface for this device.
IP Default Gateway: IP address of the gateway router between this device and
management stations that exist on other network segments.
HTTP Server: Shows if management access via HTTP is enabled.
HTTP Server Port: Shows the TCP port used by the HTTP interface.
Software Version: Shows the software version number.
Bootrom Version: Show the bootrom version number.
Hardware Version: Shows the hardware version number.
AP Wireless Configuration – The AP Wireless Configuration tables display the
radio and VAP interface settings listed below.
SSID: The service set identifier for the VAP interface.
Radio Channel: The radio channel through which the access point
communicates with wireless clients.
Encryption: The key size used for data encryption.
Authentication Type: Shows the type of authentication used.
802.1X: Shows if IEEE 802.1X access control for wireless clients is enabled.