Advanced Configuration
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 71
managing the AP from a wireless client, the VLAN ID for the wireless client
must be configured on a RADIUS server.
Current version – Version number of runtime code.
Firmware Upgrade Local – Downloads an operation code image file from the web
management station to the AP using HTTP. Use the Browse button to locate the
image file locally on the management station and click Start Upgrade to proceed.
New firmware file: Specifies the name of the code file on the server. The new
firmware file name should not contain slashes (\ or /), the leading letter of the
file name should not be a period (.), and the maximum length for file names is
32 characters for files on the access point. (Valid characters: A-Z, a-z, 0-9, “.”,
“-”, “_”)
Firmware Upgrade Remote – Downloads an operation code image file from a
specified remote FTP or TFTP server. After filling in the following fields, click Start
Upgrade to proceed.
New firmware file: Specifies the name of the code file on the server.
The new
firmware file name should not contain slashes (\ or /),
the leading letter of the
file name should not be a period (.), and the maximum length for file names on
the FTP/TFTP server is 255 characters or 32 characters for files on the access
point. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
IP Address: IP address or host name of FTP or TFTP server.
Username: The user ID used for login on an FTP server.
Password: The password used for login on an FTP server.
Configuration File Backup/Restore – Uploads the current AP configuration file to a
specified remote FTP or TFTP server. A configuration file can also be downloaded
to the AP to restore a specific configuration.
Export/Import: Select Export to upload a file to an FTP/TFTP server. Select
Import to download a file from an FTP/TFTP server.
Config file: Specifies the name of the configuration file, which must always be
"syscfg." A path on the server can be specified using “/” in the name, providing
the path already exists; for example, “myfolder/syscfg.” Other than to indicate
a path, the file name must not contain any slashes (\ or /), the leading letter