Wireless Security Commands
BreezeMAX Wi² and BreezeACCESS Wi² System Manual 237
Example
Related Commands
encryption (page 237)
key (page 237)
5.20.2 encryption

This command enables data encryption for wireless communications. Use the no

form to disable data encryption.

Syntax
encryption
no encryption
Default Setting
disabled
Command Mode
Interface Configuration (Wireless-VAP)
Command Usage
• Wired Equivalent Privacy (WEP) is implemented in this device to prevent unauthorized access to
your wireless network. For more secure data transmissions, enable encryption with this
command, and set at least one static WEP key with the key command.
• The WEP settings must be the same on each client in your wireless network.
• Note that WEP protects data transmitted between wireless nodes, but does not protect any
transmissions over your wired network or over the Internet.
• You must enable data encryption in order to enable all types of encryption (WEP, TKIP, and
AES-CCMP) in the AP.
Example
Related Commands
key (page 237)
5.20.3 key

This command sets the keys used for WEP encryption. Use the no form to delete a

configured key.

Syntax
key <index> <size> <type> <value>
no key index
•index - Key index. (Range: 1-4)
•size - Key size. (Options: 64, 128, or 152 bits)
•type - Input format. (Options: ASCII, HEX)
•value - The key string.
- For 64-bit keys, use 5 alphanumeric characters or 10 hexadecimal digits.
Enterprise AP(if-wireless g: VAP[0])#auth shared-key
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g: VAP[0])#encryption
Enterprise AP(if-wireless g)#