234 Operation
Chapter 5 - Command Line Interface
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
While the AP scans a channel for rogue APs, wireless clients will not be able to connect to the AP.
Therefore, avoid frequent scanning or scans of a long duration unless there is a reason to believe
that more intensive scanning is required to find a rogue AP.
Example
5.19.6 show rogue-ap

This command displays the current rogue AP database.

Command Mode
Exec
Example
Enterprise AP(if-wireless g)#rogue-ap scan
Enterprise AP(if-wireless g)#rogueApDetect Completed (Radio G) : 9 APs detected
rogueAPDetect (Radio G): refreshing ap database now
Enterprise AP(if-wireless g)#
Enterprise AP#show rogue-ap
802.11g Channel : Rogue AP Status
AP Address(BSSID) SSID Channel(MHz) RSSI Type Privacy RSN
======================================================================
00-04-e2-2a-37-23 WLAN1AP 11(2462 MHz) 17 ESS 0 0
00-04-e2-2a-37-3d ANY 7(2442 MHz) 42 ESS 0 0
00-04-e2-2a-37-49 WLAN1AP 9(2452 MHz) 42 ESS 0 0
00-90-d1-08-9d-a7 WLAN1AP 1(2412 MHz) 12 ESS 0 0
00-30-f1-fb-31-f4 WLAN 6(2437 MHz) 16 ESS 0 0
Enterprise AP#