66 Operation
Chapter 4 - System Configuration
VLAN Classification – Enables or disables VLAN tagging support on the AP.
Native VLAN ID – The VLAN ID th at traffic must ha ve to be able to ma nage the AP.
(Range 1-4094; Default: 1)
4.4.8 WDS Settings
WDS Settings is not applicable for the current release.
4.4.9 AP Management
The Web, Telnet, and SNMP management interfaces are enabled and open to all IP
addresses by default. To provide more security for management access to the AP,
specific interfaces can be disabled and management restricted to a single IP
address or a limited range of IP addresses.
Once you specify an IP address or range of addresses, access to management
interfaces is restricted to the specified addresses. If anyone tries to access a
management interface from an unauthorized address, the AP will reject the
connection.
Figure 4-8: VLAN Configuration