Changing the NetLinx Master Connection
1.From the NetLinx Settings page, select between Listen, Auto, and URL in the Mode
2.If you selected Auto as your Mode, enter the new system number in the System Number field, if necessary.
3.Enter the new Device number in the Device Number field, if necessary.
4.If you selected URL as your Mode, enter the Master’s IP address or URL in the Master IP/URL field, if necessary.
5.Enter the Master port number in the Master Port Number field, if necessary.
6.If you already allowed encryption with the Master, select Enabled or Disabled from the Encryption radio buttons. If you did not, these fields will be greyed out and automatically set to Disabled.
7.If the unit is already connected to the Master, enter your username and password in the Username and Password fields.
8.To save your changes, click the Apply button. If you wish to return to the previously saved settings. click Cancel.
9.Click Refresh to update your changes on the NetLinx Settings page.
IP Settings Page
The IP Settings page (FIG. 20) is accessed by clicking on the NetLinx button in the Navigation Bar. This page allows a user (with the proper access rights) to configure the IP communication parameters used by the
FIG. 20 IP Settings page
35 | |
|
|