Configuring Communication
This action causes a previously red *Not Active* field to now display a green Waiting...Press Cancel to Quit.field.
This green field indicates that Studio is waiting to detect the device value of the MAX associated with the ID button.
4.Press the MAX unit’s ID button to begin process of reading the current device value of the device and then assigning it to the new value entered in step 2.
Once the swap has been successfully made, a red Successful Identification Made field appears.
The previous Device value is then displayed below the red field.
Changing the MAX-CSD10 device number via the UI
1.From the Decoder Manager page, click the NetLinx link to open the NetLinx Settings page.
2.Enter the new device number in the Device Number field.
3.To save your changes, click the Accept button at the bottom of the page. To return to the previously saved information, click Cancel.
Resetting a
1.Locate the ID button on the front panel of the MAX unit.
2.Press and hold this button for 10 seconds to reset the parameters and reboot the MAX unit.
All modified information, such as the Static IP Address settings and modified Username/Password, will be wiped from the unit.
58 |
