AMX MAX-CSE, MAX-CSD 10 manual Audio/Video Page, NetLinx Page

MAX-CSD10 Web Interface

Audio/Video Page

The Audio/Video page (FIG. 27) allows the user to set up the video port used by the MAX-CSD10.

FIG. 27 Audio/Video Page

Audio/Video Page Features

Video Port

The video port used by the MAX-CSD10

To change the A/V setup:

1.From the Audio/Video page, select the video port to be used by the MAX-CSD10.

2.To save any changes to the port settings, click Accept. To keep the original settings, click Cancel.

NetLinx Page

The NetLinx page (FIG. 28) allows the user to check or modify the connection to the NetLinx Master.

FIG. 28 NetLinx Page

NetLinx Page Features

Status	The current status of the NetLinx Master connection.
Connection Mode	The method used to establish the connection:
	• Listen
	• Auto
	• URL
System Number	The number assigned to the particular system within a NetLinx network, if appli-
	cable
Device Number	The number assigned to the MAX-CSD10 by the NetLinx Master.
Master IP/URL	If the Connection Mode is set to "URL", this field contains the NetLinx Master IP
	address.
Master Port Number	If the Connection Mode is set to "URL", this field contains the number for the
	NetLinx Master port being used.
Encryption	If the NetLinx Master allows signal encryption, this Enabled/Disabled radio but-
	ton will be fully functional.

46 MAX-CSE/MAX-CSD10 Operation/Reference Guide