| Table of Contents |
Configuration and Firmware Update | 59 |
Before You Begin | 59 |
MAX vs. NetLinx Master - Functional Overlap | 59 |
Verifying the MAX’s current version of Firmware - via the UI | 59 |
Verifying the MAX’s current version of Firmware - via Studio | 60 |
Upgrading MAX Firmware | 60 |
Upgrading | 60 |
Upgrading | 61 |
Upgrading the MAX’s Firmware - via NetLinx Studio | 61 |
Displaying Stream Content | 63 |
Overview | 63 |
Requirements for Receiving Streamed Content | 63 |
Setting up a Modero Panel to Receive and Display a Stream | 64 |
Obtaining the IP Address of the target panel | 64 |
Configuring the | 65 |
Configuring the | 67 |
Setting up a streaming page within TPDesign4 | 68 |
Establishing the final connection between the two units | 70 |
Setting up a Computer to Receive and Display a Stream | 71 |
Obtaining the IP Address of the target computer | 71 |
Configure the | 71 |
Establishing the final connection between the CSE and computer | 72 |
NetLinx Programming | 75 |
Device:Port:System (D:P:S) | 75 |
Port Assignments | 75 |
76 | |
83 | |
89 | |
RS232/422/485 Ports Channels | 92 |
93 | |
IR / Serial Ports Channels | 94 |
IR/Serial Port (Port 3) Commands | 94 |
I/O Port Commands (Port 4) | 100 |
IR RX Port Channels (Port 5) | 100 |
LCD Commands (Port 6) | 101 |
iii | |
|
|