AMX MAX-CSD 10, MAX-CSE manual NetLinx Settings Page, Changing Video and Audio Settings

MAX-CSE Web Interface

Changing Video and Audio Settings

1.From the A/V Setup page, select from Composite or S-Video from the Video In radio buttons.

2.Select from NTSC or PAL from the Video Port radio buttons.

3.Enter the appropriate value in the Mic Gain field. Click Set to lock the entry.

4.To save the changes, click the Apply button on the top of the page. To return to the previously saved settings, click Cancel.

NetLinx Settings Page

The NetLinx Settings page (FIG. 18) is accessed by clicking on the NetLinx button in the Navigation Bar. This page allows a user (with the proper access rights) to specify which Master is to be used for communication, query, and firmware updating.

FIG. 18 NetLinx Settings page

The Encryption fields on a MAX-CSE are not enabled. To establish a connection to a target Master, both the ICSP Connectivity and Encryption requirements should be disabled from within the Master’s System Security Details page (FIG. 19).

These options must not be selected if the MAX unit is trying to establish a connection to a target NetLinx Master.

FIG. 19 NetLinx Master UI: System Security Details Page

MAX-CSE/MAX-CSD10 Operation/Reference Guide 33