AMX MAX-CSE manual Administration Page Features Cont, MAX-CSD10Web Interface, Description, Logoff

MAX-CSD10 Web Interface

Administration Page Features (Cont.)

Feature	Description
Stream Status frame:	Located on the upper-right side of the browser window, this static
	frame allows a user to not only Start and Stop an encoding
	stream, but also view whether the MAX-CSD10 is detecting an
	A/V signal.
	• Since this frame is static, it appears on-screen no matter what
	page is currently active. This frame can be very useful for a
	remote administrator when trying to troubleshooting most
	streaming issues.
Play/Stop
	The button at the top of the window reflects the condition of the
	outgoing media content:
	• Play begins to sync-up the media signals and then stream them
	out from the device.
	- This play state is shown as active when both the Stop button
	is displayed and the green Streaming message is
	displayed within the Status field.
	- No changes can be made to both the communication
	parameters and stream profiles while the unit is in this mode.
	• Stop halts the outgoing media stream from the device.
	- This stop state is shown as active when both the Play button
	is displayed and the blue Idle message is displayed within
	the Status field.
	- Changes can be made to both the communication
	parameters and stream profiles while the unit is in this mode.
Status	• Indicates the status of the outgoing stream.
	• Streaming indicates that the Play button has been activated
	and the process of receiving a media stream has begun.
	Streaming does not require that content be provided to the unit,
	it is only the conversion process which has been initiated. This
	is why it is important to make sure that the unit is also detecting
	an incoming A/V feed.
	• Idle indicates that the Stop button has been activated and the
	stream process has been halted.
Refresh
	This button causes the unit to re-verify the condition/state of the
	stream Status.
Logoff	This button logs off the Decoder Manager. The user will then
	have to log back in with the correct userid and password to
	access the Decoder Manager.
Active Page frame:	Located on the right side of the browser window, this dynamic
	frame displays the pages corresponding to the currently selected
	option from within the Navigation frame. The top of these pages
	also provide the user with some common application buttons
	such as Apply and Refresh.
	• Since this frame is dynamically populated, its contents will
	depend on which Navigation link was currently selected.

40 MAX-CSE/MAX-CSD10 Operation/Reference Guide