Installation
Diagnosing Access Point Indicators
Symptom | Action |
|
|
POWER LED is Off | • AC power adapter may be disconnected. Check connections between the access |
| point, the power adapter, and the wall outlet. |
|
|
LAN LED is Off | • Verify that the access point and attached device are powered on. |
| • Be sure the cable is plugged into both the access point and corresponding device. |
| • Verify that the proper cable type is used and its length does not exceed specified |
| limits. |
| • Check the cable connections for possible defects. Replace the defective cable if |
| necessary. |
|
|
8 |
