System Configuration

System Setting - VAP Management

The VAP Management page allows you to enable VAP management (FIG. 25).

FIG. 25 System Settings - VAP Management

When VAP management is enabled, it tags traffic from VAP#1 as high priority and traffic from VAP#2 as low priority.

This setting is only available when the Operation Mode is set to AP.

System Settings - Reset System

The Reset System page (FIG. 26) allows you to restart the WAP250G software and restore factory default settings.

FIG. 26 System Settings - Reset System

The items on this page include:

Restore Factory Settings: Click the Restore button to reset the configuration settings for the WAP250G to the factory defaults and reboot the system. Note that all user configured information will be lost. You will have to use the default IP address to re-gain management access to the WAP250G.

Reboot Access Point: Click the Reboot button to reboot the system.

28

NXA-WAP250G 802.11b/g Wireless Access Point

Page 32
Image 32
AMX NXA-WAP250G manual System Setting VAP Management, System Settings Reset System